Mackie CFX20 mkII
This is another trusted product from InstrumentPro. They have a great selection of band gear, including the Mackie CFX20 mkII presented on this page.
Mackie CFX20·mkII The Mackie CFX20 mkII mixer has been updated with more comfortable Onyx series knobs, new graphics for better visibility in less-than-ideal lighting conditions, and improved durability thanks to impact-resistant rubber side panels that have been added to the entire line. Best of all, CFX.mkII mixers are priced even lower than the popular original CFX models. Available in 12, 16 and 20 channel models, the CFX.mkII Series mixers all feature 4 subgroups, precise 9-band stereo graphic EQs for greater sonic control, and Mackie's high-quality, comprehensive EMAC™ 32-bit(!) digital effects processor. All mic/line channels have inserts and input trim controls with individual Zero Level LEDs, 3-band EQ with swept midrange, and 100Hz low-cut filers. Each channel strip has a 60mm long-taper fader, external & internal/external effects sends; 2 aux sends, pan, mute, solo (PFL), and bus assigns. Like the original CFX Series mixers, the CFX.mkII Series mixers are designed for rugged, day-in and day-out road use. Features: High-headroom mic preamps with RF rejection 20 channels (16 mic/line mono, and 2 stereo line channels) 32-bit EMAC(tm) digital effects with 9 reverbs, 4 delays, phaser, chorus, flange; 2 parameter controls + EFX wide spatial expander External and internal EFX sends EFX to Monitor control 9-band stereo graphic equalizer Inserts on all mic channels and main mix True 4-bus design with direct sub outs and L/R assign 2 Pre/Post Aux sends and internal/external FX level sends on each channel 3-band EQ with swept mid (100Hz to 8kHZ) on mic/line channels 4-band EQ on stereo line channels Pan, Mute, PFL solo on each channe Inserts and 100Hz low-cut filters on all mic/line channels Subwoofer output from built-in 18dB/oct. 75Hz crossover Ingenious BREAK switch Headphone output with level control Tape/CD inputs with level control assignable to Main Mix via Break switch Logarithmic taper 60mm faders 48V phantom power 12V BNC lamp jack Specifications: Frequency Response Mic Input to any Output Trim at 0 dB 32Hz to 20kHz +0, -1 dB, Distortion THD and SMPTE IMD; 20Hz to 20kHz Mic Input to Main Output: < 0.05% at +4 dBu output Noise 20Hz to 20kHz BW (150 Ohms source impedance) Equivalent Input Noise (EIN): -127 dBu Residual Output Noise (Main, Monitor, & Effects outputs Channel & Master levels off): -95 dBu Common Mode Rejection Ratio (CMRR) at 1kHz, Trim at 0 dB 60 dB Crosstalk Adjacent Inputs or Input to Output: -90 dB at 1kHz Fader Off: -90 dB at 1kHz Mute Switch and Break Switch Mute: -80 dB at 1kHz Input Level Trim Control Range +6 to -50dB Phantom Power +48V DC Equalization Low Cut: 100Hz, -18dB/octave Mono Channel EQ: High: ±15dB at 12kHz Mid: ±15 dB at 100Hz to 8kHz Low: ±15 dB at 80Hz Stereo Channel EQ: High: ±15 dB at 12kHz High Mid: ±15 dB at 3kHz Low Mid: ±15 dB at 400Hz Low ±15 dB at 80Hz Graphic EQ (9
These were $749.99 at the time of this posting, but please click on the product link below to find the current price and availability.
Click Here to check price or purchase the Mackie CFX20 mkII now !
Thank you for visiting BANDELECTRONICS.COM! • BOOKMARK THIS SITE