Crown PZM6D
This is another trusted product from InstrumentPro. They have a great selection of band gear, including the Crown PZM6D presented on this page.
Crown PZM6D Crown PZM6D Description: Crown PZM-6D Microphone A smaller plate makes the PZM-6D more inconspicuous than the PZM-30D, while performance is the same. Ideal for mounting on clear panels overhead or on a piano lid. The microphone offers switchable dual-frequency "rising" or "flat" response. Miniaturized electronics found in the PZM-6D's XLR-type connector housing are attached to the mic via a 12-foot mini cable. Model PZM-6DS2 has a 6-foot mini cable. The Crown PZM-6D is a Pressure Zone Microphone, designed for professional recording, sound reinforcement and broadcasting. It has many applications, from miking full orchestras or individual musical instruments to security or teleconferencing. The PZM-6D has a switchable dual frequency response: rising (R) or flat (F). The "rising‿ position adds brilliance. This makes it useful wherever a crisp attack is desired, such as on percussion, drums, or piano. The user can get a bright sound without boosting high frequencies on the recording console; the result is lower noise. The "flat‿ position provides a smooth, flat, high-frequency response for natural sound reproduction. PZM-6D has a smaller plate. Its low profile, unobtrusive appearance is appreciated in conference rooms, as well as on television, film and video productions. When suspended over an orchestra on a clear panel, the PZM-6D practially disappears. Its miniature, permanently attached cabel also reduces visual clutter. The output is a male 3-pin XLRtype, balanced and low impedance, which permits long cable runs without hum pickup or high-frequency loss. Like other Pressure Zone Microphones, the PZM-6D utilize the Pressure Recording Process in which a miniature condenser microphone capsule is positioned very close to a sound-reflecting plate or boundary. The capsule is mounted in the "Pressure Zone‿ just above the boundary, a region where sound coming directly from the sound source combines in phase with sound reflected off the boundary. The benefits are excellent clarity and "reach," a hemispherical polar pattern, uncolored off-axis response, and a wide smooth frequency response free of phase interference. Crown PZM6D Specifications: Transducer: Electret condenser. Frequency response: 20 Hz to 20 kHz. Polar pattern: Hemispherical when used on a floor,wall or ceiling. Open circuit sensitivity: 7 mV/Pa* (-43 dB re 1 volt/Pa). Power sensitivity: -43 dB re 1 mW/Pa. EIA sensitivity -135 dBm. Impedance: 240 ohms, balanced. Recommended minimum load impedance 1000 ohms. Self-noise: 20 dB equivalent sound pressure level,A-weighted. S/N ratio: 74 dB at 94 dB SPL. Maximum Sound Pressure Level: 150 dB SPL at the microphone produces 3% THD. Polarity: Positive pressure on the diaphragm produces positive voltage on pin 2 with respect to pin 3 of the output connector. Operating voltage: Phantom power, 12 to 48 volts DC, positive voltage on pins 2 and 3 with respect to pin 1 of the output connector. Current drain: 1.1 mA. Co
These were $301.38 at the time of this posting, but please click on the product link below to find the current price and availability.
Click Here to check price or purchase the Crown PZM6D now !
Thank you for visiting BANDELECTRONICS.COM! • BOOKMARK THIS SITE