Crown IT5000HD
This is another trusted product from InstrumentPro. They have a great selection of band gear, including the Crown IT5000HD presented on this page.
Crown IT5000HD Power Ratings: 2-ohm Dual (per ch), 20mS burst: 3,000W 2-ohm Dual (per ch), 20Hz-20kHz: 2,000W 2-ohm Dual (per ch), 1kHz: 2,000W 4-ohm Dual (per ch): 2,500W 8-ohm Dual (per ch): 1,250W 4-ohm Bridge: 4,000W 8-ohm Bridge: 5,000W Innovation: BSS OmniDrive HD DSP processing with IIR filters and linear phase FIR filters LCD screen provides diagnostics and preset selection to ensure fast and easy system and network setup Covered by five patents Fan has true tachometer feedback for fan fault protection and precise control over thermal performance, so the amp runs longer and harder than the competition Includes SLM (Sweep Load Monitoring) with system-level diagnostics Versatility: Global Power Supply designed to deliver maximum power no matter where your schedule takes you. Universal AC input accepts 100-240VAC, 50/60 Hz (+/-15%). Front-Panel USB connector transfers presets to/from a USB drive to the amp's DSP. New software interface based on customer feedback manages presets, provides easier system-level changes, and includes a configuration wizard. The only product available with analog, AES/EBU, CobraNet, HiQnet and Ethernet connectivity. User definable front-panel security feature. Power: Professional-grade connectors for all inputs and outputs. Full power-supply voltage is always available, allowing instantaneous power on demand. Quality-graded components let you safely drive the amplifier harder. More total capacitance provides tremendous energy reserves for power bursts. Highest output voltage in the industry (200V peak) provides clean transient peaks. Performance: Ultra smooth processing by onboard high-definition BSS OmniDrive HD DSP with 24-bit 192kHz Cirrus Logic SHARC A/D and D/A converters. World-class FIR and IIR filters. LevelMAX peak voltage and RMS power limiters communicate with each other, resulting in smooth and accurate response, better sound, higher SPL. True Ethernet backbone - fast, reliable and scalable. High common-mode rejection eliminates hum and RFI on input cables. 5th-generation patented Class-I (BCA) circuitry couples power efficiently to the load and provides low AC current draw. Specifications: Frequency Response (at 1 watt, 20Hz-20kHz): +/-0.25dB Signal to Noise Ratio below rated full-bandwidth power, A-weighted: >112dB Total Harmonic Distortion (THD) at full rated power: <0.1% Intermodulation Distortion (IMD) 60Hz and 7kHz at 4:1, from full rated output to -35dB: <0.2% Damping Factor (20Hz-100Hz at 8 ohms): >5000 Crosstalk (below rated power, 20Hz-1kHz): >70dB typical Latency (analog, digital inputs): 1.13 mS analog, 1.81 mS digital (96kHz) A/D, D/A Converters: 24-bit 192kHz Cirrus Logic Digital Input: AES/EBU, 24-bit, 32-96kHz. Onboard sample-rate converter Network: Onboard TCP/IQ and HiQnet, compatible with standard 100 Mb Ethernet hardware DSP: 24-bit conversion with 32-bit, floating-point DSP processing. World-class IIR and linear phase FIR filte
These were $5,675.00 at the time of this posting, but please click on the product link below to find the current price and availability.
Click Here to check price or purchase the Crown IT5000HD now !
Thank you for visiting BANDELECTRONICS.COM! • BOOKMARK THIS SITE