Crown CM200A
This is another trusted product from InstrumentPro. They have a great selection of band gear, including the Crown CM200A presented on this page.
Crown CM200A Crown CM200A Description: The Crown® CM-200A and CM-200ASW are cardioid condenser microphones for professional vocal and instrumental use. They offer studio quality sound, yet are rugged enough to withstand hard professional use in the field. Their outstanding performance is complemented with handsome styling and a comfortable balance. The CM-200A and CM-200ASW are identical except that the CM-200ASW has an on-off switch in the handle. It is a silent-operating magnetic reed switch. The sound of the CM-200A or CM-200ASW is smooth and non-harsh- yet very articulate- with a wider frequency range than standard vocal microphones. When used up-close, its proximity effect boosts the low-frequency response for a warm, robust sound. An upper-midrange "presence peak" adds intelligibility. The cardioid polar pattern increases gain-beforefeedback, rejects unwanted background noise, and discriminates against sounds approaching the rear of the microphone. A built-in multi-stage pop filter effectively suppresses explosive breath sounds. Handling noise is extremely low. The unit can withstand repeated drops and abuse, as well as extremely loud sound pressure levels without distortion. The output of the microphone is balanced, low impedance, which allows long cable runs without hum pickup or high-frequency loss. The unit can be phantom powered from the console or other remote power supply. Included with the CM-200A and CM-200ASW is a convenient carrying pouch, an adjustable microphone stand adapter for mounting the unit to any microphone stand, and a foam windscreen to further reduce breath popping and wind noise. Crown CM200A Features: Cardioid polar pattern reduces feedback and background noise. Smooth, articulate sound with up-close bass boost. Built rugged for the road. Handsome styling and comfortable balance. Multi-stage pop filter, low handling noise. Crown CM200A Specifications: Type: Cardioid condenser vocal-instrumental microphone Element: Electret condenser Frequency Response (typical): 80 Hz to 15,000 Hz Polar Pattern: Cardioid Impedance: 150 ohms nominal, 200 ohms actual, balanced Recommended minimum load impedance: 1000 ohms Open Circuit Sensitivity (48 V supply): 3.0 mV/Pa (-53 dBV/Pa) Power Sensitivity: -52 dBm/Pa Equivalent Noise Level (self-noise): 21.5 dB SPL typical, A-weighted. S/N Ratio: 72.5 dB at 94 dB SPL Maximum SPL for 3% THD: 151 dB SPL with 48V supply; 143 dB SPL with 12V supply Polarity: Positive pressure on the diaphragm produces a positive voltage on pin 2 with respect to pin 3 of output connector Operating Voltage: Phantom power, 12 to 48 volts DC, positive voltage on pins 2 and 3 with respect to pin 1 of output connector Current Drain: 1.7 mA Materials: Rugged aluminum alloy housing, steel grille Finish: Satin black Cable: None supplied; use 2-conductor shielded microphone cable Connector: 3-pin male XLR type Net Weight: 7 oz. (199 g) Included Accessories: Carrying pouch, ASA-2 microphone stand adapter and WS-
These were $234.23 at the time of this posting, but please click on the product link below to find the current price and availability.
Click Here to check price or purchase the Crown CM200A now !
Thank you for visiting BANDELECTRONICS.COM! • BOOKMARK THIS SITE