Audio Technica ATW-252
This is another trusted product from InstrumentPro. They have a great selection of band gear, including the Audio Technica ATW-252 presented on this page.
Audio Technica ATW-252 Audio Technica ATW-252 Description: ATW-R250 receiver and ATW-T202 handheld microphone/transmitter Select a Wireless Essentials® microphone or cable to complete the system. Audio-Technica's Freeway 200 Series Wireless Systems are designed to provide reliable performance, easy setup and clear, natural sound quality. Each 200 Series professional VHF wireless system includes a receiver and either a body-pack transmitter or a handheld microphone/transmitter on a specific crystal-controlled frequency. A novel dipole antenna system on the receiver improves operation by providing a ground element in addition to the usual signal element. Audio Technica ATW-252 Features: Easy operation and clear, natural sound quality Reliable performance and durable construction Advanced dipole antenna system for extended operating range Power, RF, and AF Peak indicators Volume control, 1/4" output jack and space-saving power supply Rugged unidirectional dynamic element on handheld microphone/transmitter Variable microphone trim control and easily accessible On/Standby/Off switch on transmitters Professional locking connector on UniPak™ body-pack transmitter Available in 5 system configurations Overall System Specifications: Operating Frequency VHF high band, 169 MHz to 172 MHz Number of Channels Fixed channel Frequency Stability ± 0.005% Modulation Mode FM Maximum Deviation ± 15 kHz Operating Range 200' typical Operating Temperature Range 40° F (4° C) to 110° F (43° C) Frequency Response 80 Hz to 13 kHz Receiver Specifications: Receiving System Non-diversity, single-channel, dual antenna system Image Rejection 50 dB minimum Signal-to-noise Ratio 80 dB at 10 kHz deviation (IEC-weighted), maximum modulation 15 kHz Total Harmonic Distortion Sensitivity 20 dBµV for 60 dB S/N (IEC-weighted) Audio Output 350 mV (1 kHz modulation, 10 kHz deviation, 100 k ohm load) Output Connector 1/4" TS ("mono") phone jack Power Supply 100-240V AC (50/60 Hz) to 12V DC 1A (center positive) switched mode external power supply Dimensions 7.48" (190.0 mm) W x 1.65" (42.0 mm) H x 5.12" (130.0 mm) D Net Weight 11.0 oz (311 g) Accessory Included Power supply Handheld Transmitter Specifications: RF Power Output 10 mW High position, 2 mW Low position, typical Spurious Emissions Under federal regulations Dynamic Range >=90 dB, A-weighted Microphone Element Dynamic unidirectional Battery 9V (NEDA type 1604) alkaline, not included Current Consumption 30 mA typical Battery Life Approximately 15 hours in High position; Approximately 20 hours in Low position (depending on battery type and use pattern) Dimensions 9.50" (241.3 mm) long, 2.10" (53.3 mm) maximum diameter Net Weight 12.7 oz (360 g) (without battery) Accessory Included AT8456a Quiet-Flex™ stand clamp Get your Audio Technica ATW-252 today!
These were $99.95 at the time of this posting, but please click on the product link below to find the current price and availability.
Click Here to check price or purchase the Audio Technica ATW-252 now !
Thank you for visiting BANDELECTRONICS.COM! • BOOKMARK THIS SITE