AKG AKG CU400 AKG CU400 ~Live Sound~~Live Sound Wireless Microphones~~AKG Install and Contracting Microphones~ @ BANDELECTRONICS.COM

bandelectronics.com

presents InstrumentPro

Go to Previous Item | BACK TO LIST | Go to Next Item

AKG CU400



~Live Sound~~Live Sound Wireless Microphones~~AKG Install and Contracting Microphones~

This is another trusted product from InstrumentPro. They have a great selection of band gear, including the AKG CU400 presented on this page.

AKG CU400 Charging station for HT400,PT400, HT40PRO and PT40 PRO, FLEXX and DUAL. Any wireless microphone system depends on sufficiently charged batteries in all the transmitters. There is nothing more embarrassing than a transmitter running out of juice in the middle of the show, or a voice fading as the transmitter battery dies. The CU 400 charging unit puts an end to this kind of hassle. It can charge two batteries simultaneously to full capacity within one hour, and there is no risk of overcharging the batteries. And what's best, you can leave the batteries inside the transmitters. The transmitters and charger use integrated charging contacts so all you have to do is plug the transmitters into the CU 400 charging unit and remove them after charging. Features: Plug-in charging Two charging slots Gentle quick-charge mode Status display Specifications: The handheld transmitter shall be housed in a miniature body and provide 1200 carrier frequencies that can be programmed via infrared within a 30 MHz wide subband. An LC display shall indicate the transmitter battery capacity in hours; as well as the frequency, frequency group, and preset name. An outside infrared sensor shall allow the frequency and input gain setting to be programmed, and a silent mode shall permit the transmitter to be used legally in R&TTE countries. The transmitter shall transmit low battery capacity and muting information to the receiver and use an integrated dipole transmitting antenna. The transmitter shall be available with an RF output of 10 mW, 20 mW, or 50 mW (ERP). The transmitter shall provide a central on/mute/off switch with IR programming and silent mode functions. Charging contacts on the bottom panel shall allow the easy charging of a rechargeable battery inside the transmitter. The audio bandwidth of the transmitter shall be 35 Hz to 20 kHz; S/N 120 dB(A); THD at 1 kHz The transmitter shall operate off one AA size dry battery for >6 hours, up to 8 hours off one AA size NiMH rechargeable battery. A means of color coding the handheld transmitter shall be included. The handheld transmitter shall measure 229 mm long x 52.5 mm max. dia. and weigh 220 g. An SA 63 stand adapter shall be included as a standard accessory. The handheld transmitter shall be the AKG HT 400. Get Your AKG CU400 Today!

These were $279 at the time of this posting, but please click on the product link below to find the current price and availability.

Click Here to check price or purchase the AKG CU400 now !

AKG

BACK TO LIST | SHOP OUR MAIN BAND INSTRUMENTS AND ELECTRONICS SITE

Thank you for visiting BANDELECTRONICS.COM!BOOKMARK THIS SITE

Shop InstrumentPro for Musical Instruments

TuneCore Music Distribution of Your Own Music


Google
 
Web www.bandelectronics.com
www.ourwholestore.com



AKG AKG CU400