AKG C680BL
This is another trusted product from InstrumentPro. They have a great selection of band gear, including the AKG C680BL presented on this page.
AKG C680BL The C 680 BL is a cost-efficient tabletop microphone for inconspicuous installation. The transducer shock mount minimizes knocking noise pickup from the table. The supplied strip of special adhesive tape allows you to fix the microphone temporarily on a table without staining the table or leaving any residue after removal. Preferred uses include conferencing, lectern, or places of worship Features: Small and inconspicuous boundary layer microphone Shock mounted transducer Cardioid polar pattern Easy to repaint Integrated phantom power adapter Specifications: Polar pattern cardioid Frequency range 60 to 20,000 Hz Sensitivity 30 mV/Pa (-30 dBV) Max. SPL 115 dB (k=1 %) Equivalent noise level 27 dB-A Signal/noise ratio (A-weighted) 67 dB Impedance 200 ohms Recommended load impedance >2000 ohms Supply voltage 9 to 52 V phantom power to DIN/IEC Current consumption Connector 3-pin XLR Cable 3 m (10 ft.) Finish matte black Dimensions 97 x 67 x 20 mm (3.9 x 2.6 x 0.8 in.) Net weight 100 g (3.5 oz.) Shipping weight 400 g (14 oz.) The boundary layer microphone shall have a hypercardioid pattern and shall fit within a rectangular envelope given by: 97 x 67 x 20 mm (3.9 x 2.6 x 0.8 in.). The sensitivity shall be no lower than 30 mV/Pa, and total harmonic distortion (THD) at an operating level of 115 dB shall be no greater than 1 %. The equivalent noise level shall be no greater than 27 dB-A. The frequency response shall be flat from 60-20,000 Hz. The microphone shall operate on phantom power over the range from 9 to 52 volts dc. Net/shipping weight: 100/400 g (3.5/14.1 oz.). Get Your AKG C680BL Today!
These were $299 at the time of this posting, but please click on the product link below to find the current price and availability.
Click Here to check price or purchase the AKG C680BL now !
Thank you for visiting BANDELECTRONICS.COM! • BOOKMARK THIS SITE