AKG C414 XLS/ST
This is another trusted product from InstrumentPro. They have a great selection of band gear, including the AKG C414 XLS/ST presented on this page.
AKG C414 XLS/ST Features: Omni, wide cardioid, cardioid, hypercardioid, figure eight, and four intermediate pickup patterns Lock Mode disables all controls easily for live and installation use Incredible Dynamic Range of 152 dB Three different bass cut filters and three pre-attenuation levels Peak Hold LED even detects shortest overload peaks Paired using AKG's sophisticated computer-aided matching method Highest possible correlation over the whole frequency range and virtually identical sensitivity Includes carrying case, two windscreens, a stereo bar, and two spider-type shock mounts Frequency range: 20 to 20,000 Hz Sensitivity: 20 mV/Pa (-34 dBV) ± 0.5 dB Max. SPL: 200/400/800/1600 Pa = 140/146/152/158 dB (0/-6/-12/-18 dB) for 0.5% THD Equivalent noise level: 6 dB-A (0 dB preattenuation) (IEC 60268-4) Signal/noise ratio: 88 dB Preattenuation pad: 0 dB, -6 dB, -12 dB, -18 dB, switchable Bass cut filter slope: 12 dB/octave at 40 Hz and 80 Hz; 6 dB/octave at 160 Hz Impedance: <=200 ohms Recommended load impedance: >= 2,200 ohms Supply voltage: 48 V phantom power to DIN/IEC Powering: approximately 4 mA Connector: 3-pin XLR to IEC Dimensions: 50 x 38 x 160 mm (2.0 x 1.5 x 6.3 in.) Net weight: 300g (10.6oz.) Get Your AKG C414 XLS/ST Today!
These were $2,199.00 at the time of this posting, but please click on the product link below to find the current price and availability.
Click Here to check price or purchase the AKG C414 XLS/ST now !
Thank you for visiting BANDELECTRONICS.COM! • BOOKMARK THIS SITE