Allen & Heath iDR-4
This is another trusted product from InstrumentPro. They have a great selection of band gear, including the Allen & Heath iDR-4 presented on this page.
Allen & Heath iDR-4 The 1U rack or desk mount iDR-4 is the main unit in the iDR system having all the DSP (Digital signal processing) power needed for 16 input and 16 output channels. The iDR-4 has a total of 6 Balanced audio inputs including 2 XLR analogue Mic/line and 4 TRS Jack line inputs. It has 6 Balanced audio outputs including 4 XLR analogue land 2 TRS Jack line outputs. You can add a further 8 inputs and/or 8 outputs bringing it up to a maximum 14x14 matrix by plugging in the iDR-In and/or iDR-Out audio expanders. The signal can be routed at three key points: the input source patch bay, central crosspoint matrix, and output source patch bay. Although the iDR does not work with networked audio, the expanders can be located up to 250 metres away so providing remote analogue audio inputs and outputs connected using CAT5 cables. You can also daisy chain multiple iDR-4 and iDR-8 units in a distributed system. The units are linked using an 8 channel wide bus which plugs into the Digital expander ports. Maximum matrix at any unit is 16x16 which includes the interconnecting bus. Several iDR units can be linked in this way, but you can have only one iDR-In and one iDR-Out expander per system. A Stereo audio monitor is included. This can be optionally configured to use Line Level input and output TRS jacks 5 and 6. The monitor can ‘ripple through’ chained iDR units. By itself, the iDR-4 can provide a 4 in 4 out system with ripple through monitor, a 6 in 4 out system with monitor output, or a 6 in 6 out system without monitor. A built-in signal/Noise Generator provides a further source which can be routed to the input channels for test and line up purposes. There are many operator control possibilities. You can configure the 8 front panel keys and 16 3- color LEDs, and use the DR-Link port to add up to 3 iDR-Switch units for up to 72 additional switch closure and 48 open-collector logic outputs. In addition you can choose two of the following: the Sys- Net serial port to interface with third party remote controllers, RS232 for modem communication, and the PL-Anet serial port for running a network of Allen & Heath PL wall plates and controllers. Get Your Allen & Heath iDR-4 Today!
These were $2,299.00 at the time of this posting, but please click on the product link below to find the current price and availability.
Click Here to check price or purchase the Allen & Heath iDR-4 now !
Thank you for visiting BANDELECTRONICS.COM! • BOOKMARK THIS SITE