Allen & Heath IPS-10
This is another trusted product from InstrumentPro. They have a great selection of band gear, including the Allen & Heath IPS-10 presented on this page.
Allen & Heath iPS-10 The iPS10 is intended as a backup power supply for iLive system components. At the time of release of this user guide it can be used with any of the 4 surfaces (iLive-80, iLive-112, iLive-144 and iLive-176) and either the IDR10 Mix Rack or iDR0 DSP MiniRack. These components can operate using their internal mains power units only. Connecting the iPS10 in addition to the internal supply provides dual supply redundancy. The component can be operated with either or both supplies switched on. It continues to operate without interruption if either supply is switched off or loses power. The iPS10 features a universal mains voltage input that can accept any AC mains voltage between 100 and 240V AC. We recommend that it is run on the same power distribution that feeds the iLive unit being connected to. For protection against temporary loss of mains power an external UPS (uninterruptible power supply) could be used. The slimline, 2U rack mountable iPS10 power supply unit is a high performance, low noise, universal mains voltage, switched mode power supply producing the DC voltages required to run the iLive Surface, IDR10 Mix Rack, or IDR0 MiniRack. It is available as an option to provide redundant backup of the internal mains power supplies fitted in these iLive components. The iLive will operate with either or both supplies switched on. Two connecting cables are required between the iPS10 and iLive. The power unit produces 5 different DC voltages and has three independent ground connections. These connect to the iLive via a 2.8 meter long multicore DC cable fitted with 10-pin circular locking connectors. Voltage rail protection, thermal sensing and fan cooling ensure the power supply unit will operate consistently. The power unit temperature information connects to the iLive via a 2.8 meter long CAT5 cable. Current status may be viewed by the operator on the iLive Surface TouchScreen. Get Your Allen & Heath iPS-10 Today!
These were $1,978.00 at the time of this posting, but please click on the product link below to find the current price and availability.
Click Here to check price or purchase the Allen & Heath IPS-10 now !
Thank you for visiting BANDELECTRONICS.COM! • BOOKMARK THIS SITE